Throughout summer, Sydney’s water storage level fell alarmingly. Level 2 water restrictions were imposed and the New South Wales government prepared to double the capacity of its desalination plant.
But then it began to rain, and rain. Sydney water storages jumped from 41% in early February to 75% now – the highest of any capital city in Australia.
This is great news for the city, but it comes with a big caveat. Floodwaters will undoubtedly wash bushfire debris into reservoirs – possibly overwhelming water treatment systems. We must prepare now for that worst-case pollution scenario.
Reservoirs filled with rain
The water level of Sydney’s massive Lake Burragorang – the reservoir behind Warragamba Dam – rose by more than 11 meters this week. Warragamba supplies more than 80% of Sydney’s water.
Other Sydney water storages, including Nepean and Tallowa dams, are now at 100%. WaterNSW report that 865,078 megalitres of extra water has been captured this week across all Greater Sydney’s dams.
This dwarfs the volume of water produced by Sydney’s desalination plant, which produces 250 megalitres a day when operating at full capacity. Even at this rate, it would take more than 3,400 days (or nine years) to match the volume of water to added to Sydney’s supply this week.
But then comes the pollution
Thankfully, the rain appears to have extinguished bushfires burning in the Warragamba catchment for months.
But the water will also pick up bushfire debris and wash it into dams.
Over the summer, bushfires burnt about 30% of Warragamba Dam’s massive 905,000 hectare water catchment, reducing protective ground cover vegetation. This increases the risk of soil erosion. Rain will wash ash and sediment loads into waterways – adding more nitrogen, phosphorous and organic carbon into water storages.
Read more: Bushfires threaten drinking water safety. The consequences could last for decades
Waterways and ecosystems require nutrients like phosphorous and nitrogen, but excess nutrients aren’t a good thing. They bring contamination risks, such as the rapid growth of toxic blue-green algae.
Drinking water catchments will always have some degree of contamination and water treatment consistently provides high quality drinking water. But poor water quality after catchment floods is not without precedent.
We’ve seen this before
In August 1998, extreme wet weather and flooding rivers filled the drought-affected Warragamba Dam in just a few days.
This triggered the Cryptosporidium crisis, when the protozoan parasite and the pathogen Giardia were detected in Sydney’s water supplies. It triggered health warnings, and Sydneysiders were instructed to boil water before drinking it. This event did not involve a bushfire.
Read more: Better boil ya billy: when Australian water goes bad
The Canberra bushfires in January 2003 triggered multiple water quality problems. Most of the region’s Cotter River catchments, which hold three dams, were burned. Intense thunderstorms in the months after the bushfire washed enormous loads of ash, soil and debris into catchment rivers and water reservoirs.
This led to turbidity (murkiness), as well as iron, manganese, nitrogen, phosphorus and carbon in reservoir waters. The inflow of organic material also depleted dissolved oxygen which triggered the release of metals from reservoir sediment. At times, water quality was so poor it couldn’t be treated and supplied to consumers.
The ACT Government was forced to impose water restrictions, and built a A$38 million water treatment plant.
Have we come far enough?
Technology in water treatment plants has developed over the past 20 years, and water supply systems operates according to Australian drinking water guidelines.
Unlike the 1998 Sydney water crisis, WaterNSW, Sydney Water and NSW Health now have advanced tests and procedures to detect and manage water quality problems.
In December last year, WaterNSW said it was aware of the risk bushfires posed to water supplies, and it had a number of measures at its disposal, including using booms and curtains to isolate affected flows.
However at the time, bushfire ash had already reportedly entered the Warragamba system.
Look to recycled water
Sydney’s water storages may have filled, but residents should not stop saving water. We recommend Level 2 water restrictions, which ban the use of garden hoses, be relaxed to Level 1 restrictions which ban most sprinklers and watering systems, and the hosing of hard surfaces.
While this measure is in place, longer term solutions can be explored. Expanding desalination is a popular but expensive option, however greater use of recycled wastewater is also needed.
Read more: 80% of household water goes to waste – we need to get it back
Highly treated recycled water including urban stormwater and even treated sewage should be purified and incorporated into the water supply. Singapore is a world leader and has proven the measure can gain community acceptance.
It’s too early to tell what impact the combination of bushfires and floods will have on water storages. But as extreme weather events increase in frequency and severity, all options should be on the table to shore up drinking water supplies.